A. The belt tension is poor. Adjust the belt tension according to the operator’s manual. B. The belts are worn. Replace the belts.

A. The blades or hammers are worn or broken. Replace the worn or broken parts. B. The blades or hammers are locked by pins. Clean and grease or replace pins. C. The rotor balancing is not correct. Check the weight of the blades or hammers to ensure they are the same. D. The rotor bearings … Continued

The working position is too low so the blades or hammers are touching the ground. Adjust the height of the rotor in relation to the ground.

12 months on Nobili, DCM and Sitrex. 24 months on Breviglieri products and Silvan Slasher drivelines.

Silvan is a Wholesaler. We rely on our dealer network to pre-deliver machinery and provide after sales support.

Silvan Farm Machinery is only available from authorised Silvan Master Dealers. Please refer to the dealer locater for your closest Master Dealer.

No. The problem with lime is that it tends to “cake up” and becomes almost solid, so a couple of things will happen. Firstly the product won’t spread and secondly there is a good chance that something will break inside the spreader because they aren’t designed for that type of product. The only machine that … Continued

A slasher only cuts the grass and then tends to leave the cut grass in wind rows – the wind rows take a long time to break down and during that time the soil tends to spoil underneath the windrow. A mulcher on the other hand mulches the grass to a very fine consistency and … Continued

The hammer blades tend to give a flatter finish (like a mower), they do though require more horse power to run. The Y blades are more suited for inter-row mulching (vineyards / orchards), This is for a couple of reasons. The Y blades are double-sided so when you wear the leading edge out you can … Continued